Teltonika RUTX50 5G Router

SA & NSA

Supports both architectures to leverage the 5G infrastructure

ULTRA-LOW LATENCY

Single-digit latency for mission-critical applications

DUAL SIM

Uninterrupted communication with auto-failover

WI-FI 5

Dual-band data throughput for up to 150 clients simultaneously

FUTURE-PROOFING

Backward compatible with 4G (LTE CAT 20) and 3G network technologies

Always online

The RUTX50 features Dual SIM with automatic Failover and Dual-Band WiFi. In addition, this device has5 Ethernet ports including 1x WAN and 4x LAN. This enables reliable data transfer with ultra-low latency for mission-critical applications. Also, this device supports both SA and NSA architecture to leverage the 5G infrastructure. Fully future-ready, the Teltonika router is also backward compatible with 4G (LTE CAT 20) and 3G network technologies.

7 external antenna connections

The Teltonika RUTX50 features 7 external antenna connections. Included with this 5G router are 4x mobile swivel antennas, 2x WiFi antennas with magnetic mount and 1x GNSS self-adhesive antenna. Should the incoming 5G or WiFi signal be limited.

RUTX50 Specification

Mobile

Mobile module

• 5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4×4 MIMO), 900/600 Mbps UL (2×2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL

Status

• Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID.

SMS/Call

• SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities

USSD

• Supports sending and reading Unstructured Supplementary Service Data messages

Black/White list

• Operator black/white list

Band management

• Band lock, Used band status display

APN

• Auto APN

Bridge mode

• Direct connection (bridge) between mobile ISP and device on LAN

Passthrough

• Gateway assigns its mobile WAN IP address to another device on LAN

Multiple PDN

• Possibility to use different PDNs for multiple network access and services

Wireless

Wireless mode

• 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates of up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)

WiFi security

• WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation

ESSID

• ESSID stealth mode

WiFi users

• Up to 150 simultaneous connections

Wireless Hotspot

• Captive portal (Hotspot), internal/external Radius server, built-in customisation landing page

Wireless mesh/roaming

• Wireless mesh (802.11s), fast roaming (802.11r)

Ethernet

WAN

• 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

LAN

• 4 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover

Network

Network protocols

• TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL)

Routing

• Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)

Connection monitoring

• Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall

• Port forwards, traffic rules, custom rules

DHCP

• Static and dynamic IP allocation

DDNS

• Supported >25 service providers, others can be configured manually

SSHFS

• Possibility to mount remote file system via SSH protocol

Security

Authentication

• Pre-shared key, digital certificates, X.509 certificates

Firewall

• Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T

Attack prevention

• DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN

• Port and tag-based VLAN separation

Mobile quota control

• Set up custom data limits for SIM card

WEB filter

• Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

Access control

• Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN

• Multiple clients and a server can run simultaneously, 12 encryption methods

OpenVPN Encryption

• DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

GRE

• GRE tunnel

IPsec

• IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

SSTP

• SSTP client instance support

STUNNEL

• Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN

• Method of building scalable IPsec VPNs

PPTP, L2TP

• Client/Server services can run simultaneously, L2TPv3 support

WireGuard

• WireGuard VPN client and server support

ZeroTier

• ZeroTier VPN

MODBUS TCP Slave

ID filtering

• Respond to one ID in range [1;255] or any

Allow remote access

• Allow access through WAN

Custom registers

• MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality

MODBUS TCP Master

Supported functions

• 01, 02, 03, 04, 05, 06, 15, 16

Supported data formats

• 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

MQTT Gateway

Gateway

• Allows sending commands and receiving data from MODBUS Master through the MQTT broker

DNP3

Supported modes

• TCP Master, DNP3 Outstation

Data to Server

Protocols

• HTTP(S), MQTT, Azure MQTT, Kinesis

IoT Platforms

Clouds of things

• Allows monitoring of: Device data, Mobile data, Network info, Availability

ThingWorx

• Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

Cumulocity

• Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP

Azure IoT Hub

• Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server

Monitoring & Management

WEB UI

• HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

FOTA

• Firmware update from server, automatic notification

SSH

• SSH (v1, v2)

SMS

• SMS status, SMS configuration, send/read SMS via HTTP POST/GET

CALL

• Reboot, Status, Mobile data on/off, Output on/off

TR-069

• OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT

• MQTT Broker, MQTT publisher

SNMP

• SNMP (v1, v2, v3), SNMP trap

JSON-RPC

• Management API over HTTP/HTTPS

MODBUS

• MODBUS TCP status/control

RMS

• Teltonika Remote Management System (RMS)

System Characteristics

CPU

• Quad-core ARM Cortex A7, 717 MHz

RAM

• 256 MB (100 MB available for userspace)

FLASH storage

• 256 MB (80 MB available for userspace)

Firmware / Configuration

WEB UI

• Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA

• Update FW

RMS

• Update FW/configuration for multiple devices at once

Keep settings

• Update FW without losing current configuration

Firmware Customisation

Operating system

• RutOS (OpenWrt based Linux OS)

Supported languages

• Busybox shell, Lua, C, C++

Development tools

• SDK package with build environment provided

Location Tracking

GNSS

• GPS, GLONASS, BeiDou, Galileo and QZSS

Coordinates

• GNSS coordinates via WebUI, SMS, TAVL, RMS

NMEA

• NMEA 0183

Server software

• Supports server software: TAVL, RMS

Geofencing

• Multiple configurable geofence zones

USB

Data rate

• USB 2.0

Applications

• Samba share, USB-to-serial, Modbus gateway

External devices

• Possibility to connect external HDD, flash drive, additional modem, printer

Storage formats

• FAT, FAT32, NTFS

Input/Output

Input

• 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high

Output

• 1 x Digital Output, Open collector output, max output 30 V, 300 mA

Events

• SMS, Email, RMS

I/O juggler

• Allows setting certain I/O conditions to initiate event

Power

Connector

• 4-pin industrial DC power socket

Input voltage range

• 9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max

PoE (passive)

• Mode B, LAN1 Port, 9 – 50 VDC

Power consumption

• Idle: <4 W
• Max: <18 W

Physical Interfaces (Ports, LEDs, Antennas, Buttons, SIM)

Ethernet

• 5 x RJ45 ports, 10/100/1000 Mbps

I/Os

• 1 x Digital Input, 1 x Digital Output on 4-pin power connector

Status LEDs

• 3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs

SIM

• 2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V

Power

• 1 x 4-pin DC power connector

Antennas

• 4 x SMA for Mobile, 2 x RP-SMA for WiFi, 1 x SMA for GNSS

USB

• 1 x USB A port for external devices

Reset

• Reboot/User default reset/Factory reset button

Other

• 1 x Grounding screw

Physical Specifications

Casing material

• Aluminium housing

Dimensions (W x H x D)

• 132 x 44.2 x 95.1 mm

Weight

• 533 g

Mounting options

• DIN rail (can be mounted on two sides), flat surface placement

Operating Environment

Operating temperature

• -40°C to 75°C

Operating humidity

• 10% to 90% non-condensing

Ingress Protection Rating

• IP30

Package Contents

• 1 x RUTX50 Router
• 1 x 18 W PSU
• 4 x Mobile antennas (swivel, SMA male)
• 2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m cable)
• 1 x GNSS antenna (adhesive, SMA male, 3 m cable)
• 1 x Ethernet cable (1.5 m)
• 1 x SIM Adapter kit
• 1 x QSG (Quick Start Guide)

The Teltonika RUTX50 provides a reliable and secure 4G and 5G Internet connection and when used with a Fixed IP SIM Card can be used for remote access for office VPN or access to remote monitoring and management devices that need a higher speed cellular connection than a traditional CAT4 4G router like the RUT200 or RUT901.

As a Teltonika Distributor in the UK, the 4G Router Store / Millbeck can provide some of the most competitive prices for the RUTX50 router as well as the full range of Teltonika routers and switches.