Zyxel FWA510 Manually Configure APN Settings

FWA510 5G Router – How To Manually Configure The APN Settings

When using LTE devices, it’s common for the “Auto” APN (Access Point Name) settings to work seamlessly, allowing the device to automatically retrieve configuration details from the SIM card. However, some users have experienced connectivity issues when relying on the “Auto” settings, particularly when the SIM card is configured for an IPv6 network, which can disrupt IPv4 connectivity.

This article will guide you through the manual setup process for APN settings on Zyxel LTE devices, using the Zyxel LTE3301-PLUS as an example. This method ensures you establish a reliable connection by correctly configuring the device to use the appropriate network settings, such as specifying IPv4.

Why Manual APN Setup Might Be Necessary

The “Auto” APN settings typically work by pulling configuration details directly from the SIM card. However, if the SIM card is set up to support an IPv6 network by default, your LTE device might struggle to establish a proper connection on an IPv4 network. This issue can prevent you from accessing the internet despite having the correct APN settings.

To resolve this issue, switching to “Manual” mode and entering the APN settings yourself can be crucial. Manually configuring the APN allows you to specify the network type, ensuring compatibility with your ISP’s requirements.

How to Manually Set Up an APN on Zyxel LTE Devices

Here’s a step-by-step guide to manually setting up the APN on a Zyxel LTE device. We’ll use the Zyxel LTE3301-PLUS and a Vodafone SIM card as our example, but the process is similar for other Zyxel models.

Access the Device Interface:

• Connect your computer to the LTE device.
• Open a web browser and enter the device’s IP address to access the web interface (usually something like 192.168.1.1).

Login to the Device:

• Enter your username and password. If you haven’t changed these, the default credentials are typically printed on a label on the device.

Navigate to Broadband Cellular WAN Settings:

• Once logged in, go to the Broadband section, then select Cellular WAN.

Enter APN Settings: (the below are an example only – contact your SIM provider to confirm your APN settings)

• APN: wap.vodafone.co.uk
• Username: wap
• Password: wap (if applicable)
• Authentication Type: PAP
• PDP Type: IPv4

Save and Apply Settings:

• After entering the settings, save them and apply the changes. The device should now attempt to reconnect using the new configuration.

Additional Resources

If you need clarification on your internet service provider’s (ISP) APN settings, numerous online resources list the standard APN values for various providers.

Just so you know, the link provided to 4GAPN.com is for informational purposes only and does not imply any association with Zyxel. Zyxel is not responsible for the content on this site or any issues that arise from using the information provided there.

Troubleshooting Tips

• Double-check APN Information: Ensure all entered APN details are accurate. Even a small typo can prevent a connection.
• Restart the Device: After applying the new settings, restart your LTE device to ensure it attempts to reconnect with the updated configuration.
• Contact Your ISP: If manual settings don’t resolve the issue, there might be a problem with the SIM card or the network. Contact your ISP for further assistance.

By manually setting up the APN, you can often resolve connectivity issues that arise from automatic settings.